Forum Fri, 28 Feb 2020 23:22:53 +0000 Joomla! - Open Source Content Management en-gb How I get multi track recording from EAD10? <br />
Is it possible?<br />
<br />
Using USB cable, I connected from EAD10's "To host" USB connector to my MacBook Pro USB port. Then I tried and succeeded recording to GarageBand, but the problem is that all the mic signal, pads and triggers are goes to the one and same track. <br />
<br />
That is the problem.<br />
<br />
It's enough for me if I can record only Midi information from pads/triggers, because whole other acoustic drums and cymbals I can traditionally recording with other microphones etc. equipment. <br />
<br />
I tried also this, recording only Midi information, but I still have same problem, all triggers go to same track of the GarageBand.<br />
<br />
I guess that I need a split each MIDI note to a different track to/with GarageBand? How can I do it?]]> (Esa) EAD10 Sat, 22 Feb 2020 15:22:57 +0000
Ipad and Iphone not recognizing the module (Pablo) EAD10 Sat, 18 Jan 2020 16:22:06 +0000 Error this accessory is not supported by this iphone <br />
I am getting error “this accessory is not supported by this iphone” while using Rec’n’Share with EAD 10. After error message EAD 10 is disconnected from device. EAD 10 software version is 2.0. Iphone software version is 13.3. Rec’n’Share software version is 1.2.6.<br />
<br />
Any help will be highly appreciated.<br />
<br />
Thanks in advance.]]> (Anand) EAD10 Thu, 09 Jan 2020 12:54:27 +0000
Connect Bluetooth headphone to EAD10 <br />
What is best way to connect a Bluetooth headphone to EAD10, without any latency.<br />
<br />
TIA/Anand]]> (Anand) EAD10 Fri, 10 Jan 2020 11:19:53 +0000
Connecting DTX Multi 12 to EAD 10 <br />
What is best way to connect DTX Multi 12 to EAD 10. I am looking for possibility of triggering samples from DTX Multi 12 and pass it to output through EAD 10. <br />
Let's say if I record using Rec'n'Share these samples should also be recorded. Same goes for monitor.<br />
<br />
TIA//Anand]]> (Anand) EAD10 Fri, 10 Jan 2020 11:17:31 +0000
Low Vol And Regular kits <br />
Does anyone know if there’s a way to have both regular kit and the low volume kit settings at the same time on EAD10?<br />
I followed the instructions on the video here but every time I wanna load the regular kit settings when I have the low volume kits it overwrites the low volume one and vice versa. The only option that I can think it could work is saving one scene at a time, and then importing them back one by one. The "one scene" option just allow you to save one scene at a time. Anyone figure this out or have any idea if this is possible? or the only way to use the different data is recalling from a flash drive as it says on the online manual.<br />
<br />
Thank you!]]> (Dennis) EAD10 Fri, 29 Nov 2019 16:16:46 +0000
Extra triggers on EAD 10 My name is Dan and I just purchase EAD 10 together with all the triggers .I have in total 5 together the main one (stereo mic.) So, three DT 50 s and one x DT 50 K. <br />
The question what is rasing is , I have two kick triggers ... what ? where goes where ...<br />
thank you very much in advance<br />
BR<br />
Dan]]> (Dan) EAD10 Wed, 20 Nov 2019 20:56:40 +0000
Assigning Voices To the DT50S W/The EAD10"></a><br />
<br />
Any questions, please reach out!<br />
<br />
Thanks,<br />
<br />
Jordan]]> (Jordan) EAD10 Thu, 01 Nov 2018 16:09:04 +0000
Splitting the trigg and mic output? <br />
I've been looking around for answers and tried diving in to the menu. But so far I've had no luck. I even tried to send the microphone input cable straight to my mixer instead of to the module but that only resulted in no signal. Tried to feed the mic phantom power aswell but no difference.<br />
<br />
Does anyone have any idea of how I could solve this? <br />
<br />
Thanks!]]> (Andreas) EAD10 Tue, 10 Sep 2019 23:21:28 +0000
EAD10 v2 & Low Volume Step By Step Guide <br />
There are two new step by step videos showing you how to properly install the new firmware, as well as the low volume scenes. Hope this helps!<br />
<br />
<a href="">EAD10 Version 2.0 Firmware Update Step By Step Guide</a><br />
<a href="">EAD10 New Low-Volume Scenes Step By Step Guide</a>]]> (Ian) EAD10 Sat, 16 Nov 2019 04:23:22 +0000
LIve Settings (Tony) EAD10 Sun, 03 Feb 2019 09:05:26 +0000 Updated manual for Rec'n'Share? " class="bb-smiley" src="" /> I can't seem to get out of the practice page!]]> (Zac) EAD10 Fri, 08 Nov 2019 23:26:04 +0000 Rec'n'Share is now available for Android <br />
Rec'n'Share is now available for Android<br />
<br />
<a href=""></a>]]> (David) EAD10 Thu, 24 Oct 2019 10:11:43 +0000
EAD10 Version 2 Now Available! <br />
Yamaha just rolled out a huge and <strong>FREE</strong> update for the EAD10. Read more about it on the <a href="">EAD10 page</a>.<br />
<br />
There are a bunch of new features like a talk-back function, settings to reduce unwanted noise, extended recording duration and click output routing.<br />
<br />
There is also an <strong>optional download</strong> of 42 user scenes that have been optimized for use with triggers and mesh heads. It brings low-volume practice and performance to a whole new level!<br />
<br />
Download it <a href="">here</a>. A new EAD10 web manual with instructions on how to update the firmware and use the new low-volume scenes are <a href=""></a>.<br />
<br />
ENJOY!]]> (Ian) EAD10 Fri, 01 Nov 2019 19:17:49 +0000
Can i have separate outputs for the kick trigger and mic? <br />
I thought about panning a left and right channel. But i'm not 100% sure on how to do that.]]> (Adam) EAD10 Wed, 01 May 2019 05:54:48 +0000
Kick Sample Randomly Triggering When Click is On <br />
I have to turn my kick trigger sound down when I engage the click track. I get random, intermittent plays when the click is on, but when it's off it functions perfectly with zero cross talk and great sensitivity.<br />
<br />
It's my own sample.<br />
<br />
Anyone else experience this?<br />
<br />
Thanks!]]> (Chris) EAD10 Fri, 12 Jul 2019 03:02:07 +0000
How to combine with dtx502 plus rec n share (Diego) EAD10 Fri, 21 Jun 2019 00:38:07 +0000 EAD-10 system WITH mesh heads and low volume cymbals. <br />
Pleeeease don't tell me it doesn't makes sense because a) it's designed for a regular acoustic drumset or b) mesh heads make no sound... Anyone who has played a "silent" kit knows that no matter if the drums have mesh head, it's not fully silent and still keeps some tone because the reso head. Many drummers I know are curious if the system is capable of get some of that tone and enhance it enough, for example, to practice at home instead of using a full electronic kit.<br />
<br />
Also know that the mesh heads can be triggered but the question is specifically about the acoustic tone of this solution.<br />
I hope this makes sense. Thanks.]]> (Victor) EAD10 Mon, 09 Apr 2018 19:19:56 +0000
Live connection to a mixer Thanks.]]> (Gregg) EAD10 Fri, 27 Jul 2018 10:29:42 +0000 I have roland rt-30 hr dual zone trigger , how can I use it with Ead10 ?,-how-can-i-use-it-with-ead10,-how-can-i-use-it-with-ead10 (Sanjeet) EAD10 Fri, 12 Apr 2019 22:40:42 +0000