Forum https://www.yamahadtx.com/forum/index Wed, 01 Apr 2020 10:53:01 +0000 Joomla! - Open Source Content Management en-gb Can I delete a freshly recorded pattern without loosing/resetting the User pattern data like clicktrack bpm and beatstyle 3/4 or 4/4? https://www.yamahadtx.com/forum/can-i-delete-a-freshly-recorded-pattern-without-loosing-resetting-the-user-pattern-data-like-clicktrack-bpm-and-beatstyle-3-4-or-4-4 https://www.yamahadtx.com/forum/can-i-delete-a-freshly-recorded-pattern-without-loosing-resetting-the-user-pattern-data-like-clicktrack-bpm-and-beatstyle-3-4-or-4-4 to record four measures of a (cymbal) pattern. It dubbed over (because of incorrect setting of one shot or loop style) and I searched for a way to delete the recording. No way! A recording is easily made but you cannot get rid of it. I can only clear a complete pattern, so including the earlier mentioned settings (bpm, measure, name etc). As an alternative to completely clearing a User-pattern there is only a CLEAR ALL patterns (so all User patterns previously recorded on the Yam). My question: Is there no easier way to clear (or override) the last recording and redo the recording over and over until it is OK (and only then assign it to a pad)??<br />
Thanks in advance<br />
Gerard, the Netherlands.]]>
gerardpvandijk@gmail.com (Gerard) DTX-MULTI 12 Tue, 06 Mar 2018 20:52:38 +0000
Does anyone know how to record drumming with a Yamaha DTX900? https://www.yamahadtx.com/forum/does-anyone-know-how-to-record-drumming-with-a-yamaha-dtx900-1 https://www.yamahadtx.com/forum/does-anyone-know-how-to-record-drumming-with-a-yamaha-dtx900-1 jaypolkam21@gmail.com (jay) DTX900 Series Mon, 30 Mar 2020 06:40:49 +0000 Dtx Multi 12 with HH 65 doesn’t send off key to ‘close hi hat’ https://www.yamahadtx.com/forum/dtx-multi-12-with-hh-65-doesn%E2%80%99t-send-off-key-to-%E2%80%98close-hi-hat%E2%80%99 https://www.yamahadtx.com/forum/dtx-multi-12-with-hh-65-doesn%E2%80%99t-send-off-key-to-%E2%80%98close-hi-hat%E2%80%99 <br />
Very happy with my recent aquisition of a Multi 12 but I am having very specific trouble with the hi hat controller. The closing of the pedal doesn’t stop the open sound. It does trigger the closed sound and it does ‘click’ the hi hat but i cannot control the length of the open sound, which just keeps going Until it naturally decays. If i set the ‘note key off’ to on, then it just stops at the preset time, which is obviously not a fix. Is there a setting I am missing to conect the note key off command to the closing of the hhh65? <br />
Thanks!]]>
dandumitru.olar@gmail.com (Dan) DTX-MULTI 12 Wed, 18 Mar 2020 22:19:06 +0000
How to make a pad react with the hh65 controller? https://www.yamahadtx.com/forum/how-to-make-a-pad-react-with-the-hh65-controller https://www.yamahadtx.com/forum/how-to-make-a-pad-react-with-the-hh65-controller <br />
Bought a DTX-multi 12 a few weeks ago and today I bought the Yamaha HH65 controller. <br />
I use it as a portable small drumkit and I customize the sounds and pads as I like it the best right now.<br />
<br />
My Hihat pad is on pad 7 and I can’t figure out how to make the pad react with the pedal as a normal hihat. The pedal works and make a normal sound when I step on it but have no effect on the hihat pad. I looked in the manual and tried a lot of settings but I cant find anything that explains how to make it work with a pad. <br />
<br />
Looked around the web but I can’t find the information.<br />
<br />
Thanks for your help //Michael]]>
mickerolandeklund@hotmail.com (Michael) DTX-MULTI 12 Thu, 14 Dec 2017 19:37:34 +0000
New M12 tutorial videos! https://www.yamahadtx.com/forum/new-m12-tutorial-videos https://www.yamahadtx.com/forum/new-m12-tutorial-videos <br />
Simon Edgoose just put out a whole series of videos on YouTube talking about various features like stacking and pattern making on the Multi-12. Really easy to understand and super informative, especially for those who do not use the iOS app!<br />
<br />
Check them out here: <a href="https://www.youtube.com/playlist?list=PL3rjqgoqj7LLoe4QQ6gqpuh772ZyqWdwV">DTXM12 Videos</a>]]>
iho@yamaha.com (Ian) DTX-MULTI 12 Mon, 16 Mar 2020 19:53:06 +0000
Connect my DTXM12 to Ipad https://www.yamahadtx.com/forum/connect-my-dtxm12-to-ipad https://www.yamahadtx.com/forum/connect-my-dtxm12-to-ipad <br />
I just bought a DTXM12 and are trying to connect it to my Ipad. I got a lightning to USB adapter and then a cable to the DTXM12. When I connect it I dont get the green light in the right corner in the app DTMX12 Touch. Is there something more I need to do?<br />
<br />
Regards!<br />
/Niklas]]>
niklaseklund75@gmail.com (Niklas) DTX-MULTI 12 Tue, 03 Dec 2019 16:27:55 +0000
Bass drum pedal/kick pad noise. https://www.yamahadtx.com/forum/bass-drum-pedal-kick-pad-noise https://www.yamahadtx.com/forum/bass-drum-pedal-kick-pad-noise hardyjunkmail@gmail.com (Sam) DTX502 Series Wed, 04 Mar 2020 03:55:54 +0000 Partial loading of AC_KIT & EC_KIT https://www.yamahadtx.com/forum/partial-loading-of-ac_kit-ec_kit https://www.yamahadtx.com/forum/partial-loading-of-ac_kit-ec_kit <br />
Is it possible to load AC_KIT &amp; EC_KIT partially.<br />
<br />
I need only Oak and Rock from AC_KIT and all for EC_KIT considering limited space of 64 MB.<br />
<br />
Will this steps work to copy both Acoustic and Electric kit partially. I want only Oak and Rock from Acoustic and all of electric.<br />
<br />
1. Import acoustic set -&gt; delete kits other than ones you want to retain (oak and rock in my case). Delete other wave files as well to create space.<br />
2. Change wave file location and name of files associated with Oak and Rock. Like WV027 changed to WV127 -&gt; change assignment in oak/rock kit as well.<br />
3. Change location of Oak and Rock kits to lets higher location like 50+<br />
4. Export the oak and rock kits with option all.<br />
5. Import Electric kit<br />
6. Import acoustic kit exported in step 4. <br />
<br />
<br />
TIA//Anand]]>
anand73k@yahoo.com (Anand) DTX-MULTI 12 Mon, 13 Jan 2020 04:16:38 +0000
Is there any way to 3 PCY135 (three zone) cymbals with DTX502? https://www.yamahadtx.com/forum/is-there-any-way-to-3-pcy135-three-zone-cymbals-with-dtx502 https://www.yamahadtx.com/forum/is-there-any-way-to-3-pcy135-three-zone-cymbals-with-dtx502 <br />
I'm enjoying my DTX532K set which includes two PCY135 (three zone) cymbals: one for the ride, one for the crash. I wanted to add another cymbal to my setup and purchased another PCY135. I plugged it into the extra jack on the kick pad, but it is only a single zone pad.<br />
<br />
I guess that this is expected (after reading the documentation).<br />
<br />
Is there any other way to get a 3rd three zone cymbal to this system? I don't want to give up my hi-hat or snare. Does this mean that I'm out of luck?<br />
<br />
Thanks,<br />
Glenn]]>
gboysko@gmail.com (Glenn) DTX502 Series Sat, 23 Nov 2019 23:26:32 +0000
How to setup a FC-7 type foot controller for overall volume control? https://www.yamahadtx.com/forum/how-to-setup-a-fc-7-type-foot-controller-for-overall-volume-control https://www.yamahadtx.com/forum/how-to-setup-a-fc-7-type-foot-controller-for-overall-volume-control <br />
I'd like to use a foot controller to adjust DTX-multi 12 overall volume. I tried to connect it according to the description in the manual on page 29 (followed). I connect a FC-7 type generic foot controller and tried to connect it on CC07 but failed in the UTIL4-1 setup, the 13-17 foot SW LED doesn't light up at all. My question is, when I setup UTIL4-1, the screen shows<br />
<blockquote><br />
UTIL4-1 -FTSW- ch10<br />
Func=CC07/127<br />
</blockquote><br />
What is the ch? and what channel should I set it to? How can I make the foot controller work for adjusting overall sound? thanks!<br />
<br />
<br />
<br />
<blockquote><br />
With the DTX-MULTI 12 turned off, connect the FC7 Foot Controller via the FOOT SW jack.<br />
• Turn on the DTX-MULTI 12.<br />
• On the Foot Switch Input page (UTIL4-2), set FootSwIn-Sel to “FC7”. (See page 89.)<br />
• On the Pad Function page (UTIL4-1), select FTSW and<br />
then set Func to the MIDI Control Change message (“CC01” to “CC95”) that you want to control. (See page 88.)<br />
</blockquote>]]>
vixensjlin@yahoo.com (Shih) DTX-MULTI 12 Tue, 04 Feb 2020 04:18:00 +0000
How I get multi track recording from EAD10? https://www.yamahadtx.com/forum/how-i-get-multi-track-recording-from-ead10 https://www.yamahadtx.com/forum/how-i-get-multi-track-recording-from-ead10 <br />
Is it possible?<br />
<br />
Using USB cable, I connected from EAD10's "To host" USB connector to my MacBook Pro USB port. Then I tried and succeeded recording to GarageBand, but the problem is that all the mic signal, pads and triggers are goes to the one and same track. <br />
<br />
That is the problem.<br />
<br />
It's enough for me if I can record only Midi information from pads/triggers, because whole other acoustic drums and cymbals I can traditionally recording with other microphones etc. equipment. <br />
<br />
I tried also this, recording only Midi information, but I still have same problem, all triggers go to same track of the GarageBand.<br />
<br />
I guess that I need a split each MIDI note to a different track to/with GarageBand? How can I do it?]]>
esa.damski@icloud.com (Esa) EAD10 Sat, 22 Feb 2020 15:22:57 +0000
How To: edit pad zones on the DTX700 https://www.yamahadtx.com/forum/how-to-edit-pad-zones-on-the-dtx700 https://www.yamahadtx.com/forum/how-to-edit-pad-zones-on-the-dtx700 https://www.youtube.com/watch?v=0VqoGhmXlDY">How To Edit Pad Rim Zones On DTX700<br />
</a><br />
<br />
Quick video showing you how to access the rim zone settings on the module!<br />
<br />
I actually never knew how to do this when I had my DTX750K. People have also asked me how to edit pad zones so it seems its not very obvious how to do so. Even on the app its not very easy to find!]]>
iho@yamaha.com (Ian) DTX700 Series Fri, 21 Feb 2020 23:48:53 +0000
Any cheap, compact pads to expand the DTX522 kit for percussion sounds https://www.yamahadtx.com/forum/any-cheap,-compact-pads-to-expand-the-dtx522-kit-for-percussion-sounds https://www.yamahadtx.com/forum/any-cheap,-compact-pads-to-expand-the-dtx522-kit-for-percussion-sounds <br />
Any ideas for any suitable pads that I could add?<br />
<br />
Thanks,<br />
<br />
Tony.]]>
tony.donovan@outlook.com (Tony) DTX502 Series Mon, 10 Feb 2020 09:10:10 +0000
DTX700 Ride Cymbal Issues https://www.yamahadtx.com/forum/dtx700-ride-cymbal-issues https://www.yamahadtx.com/forum/dtx700-ride-cymbal-issues Troubleshooting steps I've taken:<br />
<br />
1. Swapped cymbal pads<br />
2. Swapped cables<br />
3. Updated module firmware<br />
4. Restored module to factory defaults<br />
5. Adjusted the volume and velocity settings<br />
<br />
I'm inclined to think the module is having issues. The only thing I haven't done is to plug the cymbal pad into the extra jack on the kick drum and assigning it. Any ideas would be greatly appreciated!]]>
roudemail@gmail.com (Ron) DTX700 Series Tue, 04 Feb 2020 16:01:55 +0000
DTX500 - The sensitivity of the snare is too low!! HELP! https://www.yamahadtx.com/forum/dtx500-the-sensitivity-of-the-snare-is-too-low-help https://www.yamahadtx.com/forum/dtx500-the-sensitivity-of-the-snare-is-too-low-help   I have 2 yamaha drum sets, 1 dtx502 series and dtx500 series. And the sensitivity of the snare of dtx500 is too low. I read a manual and pressed "SHIFT+DRUM KIT" and set up the gain to 99(max) and MVI to 65 (20 MVI is loud enough for other pads) but it's not sensitive. When i strongly hit it, it produces sound but doesn't make any sound when i hit it normally. This is not the issue with the snare pad or cable (It works very fine when i connect it to dtx502). I've done the factory reset and nothing changed. Can i get any help?? Thanks!]]> nogo1024@gmail.com (Ian) DTX502 Series Sat, 01 Feb 2020 11:15:06 +0000 DTX 502 brain does not want to power off https://www.yamahadtx.com/forum/dtx-502-brain-does-not-want-to-power-off https://www.yamahadtx.com/forum/dtx-502-brain-does-not-want-to-power-off kloraparo@yahoo.com (R) DTX502 Series Wed, 22 Jan 2020 16:24:02 +0000 HH65 setup https://www.yamahadtx.com/forum/hh65-setup https://www.yamahadtx.com/forum/hh65-setup I am using Touch app as well.<br />
Owner's manual is not sufficient.<br />
I am definitely not alone with this subject.<br />
<br />
1. How to confirm that there is a signal going from the pedal? Some visible or audible indicator on the unit or Touch app?<br />
2. If there is no signal, what to check and how and is there service manual available?<br />
3. How to configure HH65 to trigger external HH? I have visible signal from ext HH but not from pedal.<br />
3. How to do this with Touch app?<br />
4. What is the difference in hihat function setup as hi-hat or Midi<br />
<br />
I appreciate quick reply.<br />
<br />
Thanks.]]>
paap@paap.ee (Paap) DTX-MULTI 12 Wed, 29 Jan 2020 17:34:47 +0000
Why is there still not Android app or any other option other than IOS apps for the drum pad?? https://www.yamahadtx.com/forum/why-is-there-still-not-android-app-or-any-other-option-other-than-ios-apps-for-the-drum-pad https://www.yamahadtx.com/forum/why-is-there-still-not-android-app-or-any-other-option-other-than-ios-apps-for-the-drum-pad cms6506@gmail.com (Chad) DTX-MULTI 12 Mon, 18 Feb 2019 21:08:44 +0000 Using the Multi 12 MIDI to control a Roland SP-404SX Sampler https://www.yamahadtx.com/forum/using-the-multi-12-midi-to-control-a-roland-sp-404sx-sampler https://www.yamahadtx.com/forum/using-the-multi-12-midi-to-control-a-roland-sp-404sx-sampler archerenergy@hotmail.com (Paul) DTX-MULTI 12 Sun, 09 Feb 2020 12:48:41 +0000 can i use DIY kick trigger for dtxm12? newbie here. https://www.yamahadtx.com/forum/can-i-use-diy-kick-trigger-for-dtxm12-newbie-here https://www.yamahadtx.com/forum/can-i-use-diy-kick-trigger-for-dtxm12-newbie-here alecvpajaro@gmail.com (Jon Alec) DTX-MULTI 12 Wed, 20 Nov 2019 14:08:15 +0000