An easy option for adding samples to the DTX900/M is to load a pre-recorded sample such as a “loop” wave from a USB memory device. This article includes a video tutorial.
SAMPLING ADVISORY:Unauthorized copying of the commercially available musical data including audio data is strictly prohibited except for your personal use.
Preparation – WHAT YOU NEED: IF YOU HAVE A DTX900 – make sure you have installed the correct DIMM memory chips (matched pair up to 256MB/each, total 512MB). You will also need a USB memory device and an audio loop. There are many loop files available on CD-ROM and many can be found on the web. A loop file has information that tells the DTX900/M to play the sound continuously from beginning to end.
Use a computer to copy the desired sample from CD-ROM onto the USB memory device. The file must be 16-bits and have the extension .wav OR .aif.
LOAD a WAVE to a USER VOICE: Insert the USB memory device into the “To Device” port of the back of the DTX900/M. The LCD will flash “Connecting USB device” and then return to the previous display.
Press the [FILE] mode button then press the [F2] LOAD button. Move the cursor to the Type parameter and set it to “Wave” which allows us to view any waveforms (samples) residing in the current directory on the right side of the LCD. Move the cursor to the right and highlight the sample to be loaded. Press [SF1] EXEC and select an empty user voice from User-A:001 to User-H:127.
Press the [SF1] EXEC button again to execute the load operation.
Assign the Loop to a TRIGGER SOURCE
Now that we have a looped user voice in memory it can be assigned to any trigger source just like an internal drum voice. Press [F2] VOICE and press [SF5] SOURCE to assign the loop to “tom1Rm2”.
However, since it is a looping sound, playing the trigger will cause the sound to play indefinitely unless we make a few changes to the trigger source parameters. Pressing [EXIT] will stop a looped voice from sounding, but this is not practical in a live situation. We’ll set the trigger source so that a single hit will start the loop and another hit will stop it.
Press [F1] VOICE then [SF4] OTHER and highlight the RcvKeyOff parameter and set it to “on”.
Press [F5] PAD then [SF4] TRIGGER and cursor to the right until you get to the HoldMode parameter and set it to “on”.
Now when you play Tom1Rim2 alternately it will start and stop the looping user voice.
STORE the kit to User Memory:
Press the [ENTER/STORE] button, cursor to the right and select the User kit destination and then press [ENTER]. Confirm your selection by pressing [INC/YES].
SAVE the “AllData” file to the USB device.
Because the newly created kit uses a sample you need to save an “AllData” file so you can load your kits and samples together.